ADAMS DRIVESHAFT JL 4XE REAR 1310 CV DRIVESHAFT [EXTREME DUTY SERIES]

New Rear Extreme Duty Jeep JL Wrangler 4XE 1310 Series CV Driveshaft with a Transfer case Yoke, and Pinion Yoke. Custom made by Adams Driveshaft.

Now that you own the Newest Generation Wrangler, it's time to upgrade to the Strongest Made Driveshaft.

Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do as you can see in the Pictures above. We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.

Application:

FITS JEEP JL WRANGLER 4XE 2 OR 4 DOOR MODELS ONLY.

*PLEASE NOTE: In some rare instances, the rear differential could be an M200. If you have an M200, please let us know when you order. If you find during installation you have an M200, we will send out the special yoke 2nd Day Express at no charge to exchange.

***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***

This Extreme Duty Series Solid 1310 CV Driveshaft will work up to 37" Tall Tires, after that size we recommend upgrading to our [Extreme Duty 1350 Solid Series]. Bigger tires add more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc., so you want to make sure you are buying the Strongest driveshaft for your Jeep. This Driveshaft will work up to a 4.5" Lift after that the angle may be too Severe or Bind.

We do know most of the measurements of your JL, but there are some we do not due to the many different size of lifts, and differentials. Please Note: If you have Coil Overs, Rock Krawler brand Lift kit, a Lift Higher that 4.5", have installed a different T-case, or a Different Differential we will need you to get us a measurement. Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement. You could use this measurement chart below to get the measurement. 

Benefits of Buying an Adams Driveshaft:

• Rear Driveshaft Part# ASDJL-1310R-S2D-4XE, ASDJL-1310R-S4D-4XE
  
• Made out of 2 1/2" X .95 Wall D.O.M. tubing that is Double the Strength of the Factory Tubing to Handle more Abuse. Competitors use 2 1/2" x.083.
• Has a Longer Slip n Stub than some of our Competitors.
• Built Only with Components made by Spicer and Neapco.
• Use the Strongest Non Greasable U-joints on the Market.
• American Made Rear 1310 Transfer Case Output Shaft Yoke.
• Has an American Made Forged JL Sport Pinion Yoke and Heavy Duty 1310 U-Bolts.
• Contains a set of [4] Grade 10 CV Bolts with small heads on them so they are easier to install and Loctite. Our Competitors comes with Grade 8.

This Item will include the following parts:

[1] 2 1/2" X .95 Wall Extreme Duty 1310 CV Driveshaft with Spicer Solid U-joints. Lifetime Warranty if you twist our tube, break a weld, or Break a U-joint in half due to Torque.

[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.

[1] American Made Forged 1310 Rear JL Sahara - Sport Pinion Yoke.

[1] Set of Heavy Duty 1310 U-bolts

[1] Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install. 

[1] Adams Driveshaft T-Shirt.

 Driveshafts come painted Gloss Black Show Quality.

 CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

SINCE JEEP PRODUCED THIS MODEL WITH 2 DIFFERENT DIFFERENTIAL OPTIONS, WE NEED TO KNOW WHICH DIFFERENTIAL YOU HAVE BEFORE ORDERING.  

BELOW IS A PICTURE OF AN M220:

BELOW IS A PICTURE OF AN M200: