ADAMS DRIVESHAFT LJ Front 1350 HALF ROUND CV DRIVESHAFT [EXTREME DUTY SERIES] SOLID U-JOINT

ADAMS DRIVESHAFT LJ Front 1350 HALF ROUND CV DRIVESHAFT [EXTREME DUTY SERIES] SOLID U-JOINT

$689.95

Adams Driveshaft SKU: ASDLJ-1350CVF-S

Add $150.00 more for FREE shipping!

New Front Extreme Duty Jeep LJ Cherokee 1350 Series Half Round CV Driveshaft With Solid U-joints Custom made by Adams Driveshaft.

Application: 2004 to 2006 Jeep LJ Wrangler's. These driveshafts are custom made so if you have altered the front differential, or transfer case's example [Dyna track housings, Dan 60 or Atlas Transfer cases] we can accommodate you. We will just need to know this Information and have you get us a measurement.

This Extreme Duty Solid 1350 CV Driveshaft will work up to 42" Tall Tires. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc. so you want to make sure you are buying the right driveshaft for your Jeep.

We will need you to get us a measurement off of your Jeep with it sitting at ride Height. There is a measurement chart below, or in the pictures that show you how to measure. Please call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Monday thru Friday if you have any questions about this driveshaft, or how to measure.

In some cases the Yoke might hit the T-case Linkage. If this happens, then you may have to move , Adjust, or change to a Cable Linkage.


This Item will include the following parts: 

[1] 1350 Solid U-joint 2" X .120 Wall Rock Crawler CV Driveshaft. Lifetime Warranty if you twist our Tube or break a Weld due to Torque.

[1] 1350 Front Half Round 26 Spline Transfer Case Output Shaft Yoke.

[1] 1350 Front Dana 30, Dana 44, or Dana 60 Forged Pinion Yoke.

[1] Set of Grade 10 CV Bolts. There is four bolts with small heads so they are easier to install.

[1] Set of 1350 U-Bolts.

Driveshaft comes painted Gloss Black Show Quality.

CA Residents:  WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

                   

Warranty Information

DRIVESHAFT: Lifetime Warranty on the Welds and Tubing if they break due to torque. All other Components have a One Year Warranty against any defects. No warranty if components break due to bad angles. The CV Kits and Slip n Stub are wear Items and should be greased about every three months or three thousand mile what ever comes first. No warranty if the CV Kit, or Slip n Stub are not maintained properly.